Fleece Performance LML CP3 Conversion Kits FPE-LML-CP3-10

Product Description

Improve your LML Duramax fts reliability and fueling capability with a CP3 conversion. Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms. Failures of the CP4 are extremely costly and require replacement of the entire fuel system. Our kit provides you with OEM fit and finish features like a brand new Bosch CP3 with heavy duty 10mm cam, Fleece exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and our valley feed line to support aftermarket lift pump applications. Features Heavy Duty CP3 with 10mm displacement cam High flow CP3 feed and return fittings Preformed feed and return fuel lines Kit Contents CP3 to rail high pressure fuel line High flow CP3 feed and return fuel fittings Preformed feed and return fuel lines CP3 mounting adapter Dosing injector fuel lines and mounting bracket FCA extension harness Low pressure fuel feed lines Hardware kit Application Notes This kit has been tested for use in stock application trucks that did not utlize a fuel lift pump. For optimal performance, if the truck is equipped with a lift pump, the feed pressure to the CP3 should not exceed 2 psi. Engine surging may be induced by the additional fuel pressure of a lift pump operating at pressures over 2 psi. For higher lift pump pressures, FCA table values will require adjustment. Covered under SC E Emissions certificate num SC FLC01 0013 What LML CP3 Conversion Kit is right for you We ftve got a number of choices when it comes to CP3 conversion kits, let us help you in the proper selection FPE LML CP3 NP Our inNo Pump in kit for the LML CP3 conversion gives you the option to select your own CP3 pump for your application. Our kit provides you with all of the hardware you need to adapt a LBZ LMM based Bosch CP3 to your 2011 2016 LML Duramax. FPE LML CP3 WP Our inWith Pump in kit for the LML CP3 conversion gives you a brand new LBZ LMM Bosch CP3 along with all of the hardware you need to convert your CP4 equipped Duramax to a CP3. This kit is designed for use with or without a low pressure lift pump. For optimal performance, if the truck is equipped with a lift pump, the feed pressure to the CP3 should not exceed 11 psi when utilizing this kit. FPE LML CP3 10 Our Heavy Duty kit for the LML CP3 conversion features a brand new LBZ LMM Bosch CP3 equipped with a Fleece Performance 10mm stroker cam along with all of the hardware you need to convert your CP4 equipped Duramax to a CP3. This kit is designed for use with or without a low pressure lift pump. For optimal performance, if the truck is equipped with a lift pump, the feed pressure to the CP3 should not exceed 2 psi. A lower rate spring is available from Fleece Performance for customers with a PowerFlo lift pump. Engine surging may be induced by the additional fuel pressure of a lift pump operating at pressures over 2 psi. For higher lift pump pressures, FCA table values will require adjustment.